A set of stators and rotors are installed in the working cavity. The transmission shaft in the working cavity adopts a cantilever type. The elastic coupling connects the motor and the main shaft in the bearing box to improve the running quality of the transmission shaft. The sealing form is selected according to different working conditions.
It is suitable for medium and large batch cyclic processing production process or high temperature operation, flammable and explosive working conditions. It is recommended to use it together with a vertical high-shear dispersing emulsifier for better processing effect.
Selection table of SDX1/SDM1 series horizontal high-shear dispersing emulsifier
| Type No. | Power (KW) | Speed (rpm) ABC | A | B | C | D | E | F | G | H | I | J/DN | K/DN | Flow range: m 3 /h | nd |
| SDX1/100 | 2.2 | 2850 | 575 | 90 | 180 | 150 | 20 | 300 | 220 | 280 | 250 | 40 | 32 | 0-3 | 4- Φ 20 |
| SDX1/140 | 5.5 | 2920 | 743 | 137 | 224 | 182 | 25 | 400 | 320 | 375 | 346 | 50 | 40 | 0-5 | 4- Φ 20 |
| SDX1/165 | 7.5 | 2920 | 743 | 137 | 224 | 182 | 25 | 400 | 320 | 375 | 346 | 50 | 40 | 0-8 | 4- Φ 20 |
| SDX1/180 | 11 | 2930 | 848 | 124 | 250 | 190 | 25 | 480 | 405 | 420 | 380 | 65 | 50 | 0-12 | 4- Φ 20 |
| SDX1/185 | 15 | 2920 | 900 | 124 | 250 | 190 | 25 | 480 | 405 | 420 | 380 | 65 | 50 | 0-18 | 4- Φ 20 |
| SDX1/200 | twenty two | 2940 | 970 | 124 | 270 | 190 | 15 | 550 | 475 | 445 | 405 | 80 | 65 | 0-25 | 4- Φ 20 |
| SDX1/210 | 30 | 2955 | 1510 | 150 | 290 | 230 | 15 | 1100 | 1000 | 510 | 460 | 80 | 65 | 0-35 | 6- Φ 20 |
| SDX1/230 | 45 | 2970 | 1560 | 150 | 315 | 240 | 15 | 1150 | 1050 | 550 | 500 | 100 | 80 | 0-50 | 6- Φ 20 |
| SDX1/245 | 55 | 2960 | 1690 | 150 | 340 | 250 | 15 | 1280 | 1180 | 610 | 560 | 100 | 80 | 0-75 | 6- Φ 20 |
| SDX1/260 | 75 | 2970 | 1740 | 150 | 370 | 260 | 15 | 1330 | 1230 | 670 | 620 | 125 | 100 | 0-90 | 6- Φ 20 |
| SDX1/275 | 90 | 2970 | 1810 | 150 | 370 | 270 | 15 | 1410 | 1310 | 670 | 620 | 125 | 100 | 0-110 | 6- Φ 20 |
| SDX1/280 | 132 | 2970 | 1960 | 150 | 385 | 285 | 15 | 1560 | 1400 | 780 | 730 | 150 | 125 | 0-130 | 6- Φ 24 |
Note: * The flow range in the table refers to the data measured when the medium is "water", and the outlet pressure of the model listed in the table is ≤ 0.2MPa.
* If a cyclic process is adopted, it is recommended to be used in conjunction with a vertical high-shear dispersing emulsifier.
* If there are working conditions such as high temperature, high pressure, flammable, explosive, corrosive, etc., the relevant and accurate parameters must be clearly provided for correct selection and customization.
* For media with poor fluidity, it is recommended to use a pump with a matching flow rate at the inlet to deliver, and the pumped pressure is ≤ 0.2MPa.
* The correct parameters are subject to the actual product provided, and the data is subject to change without notice.